nunyadb
July 16th, 2009, 9:10 am
Alright folks, I've come out with a new product for motorcycles, 4 wheel atv's,
snowmobiles, etc.
Basically, anything that uses a small battery 12 volt system and that battery is
in a hard to reach or access location.
It is a 2 part Jumper Cable system.
The first part is 18 inches long and has battery terminal ring connectors on one end.
These are permanently attached to the battery. Once installed, you don't have to
dig around to get to your battery any more. The other end of the first part is a
standard two prong plug that is compatible with some of the trickle chargers out there
on the market, and also some of the heated riding suits that are sold.
When not needed, it's just simply tucked out of sight so it is not even noticeable.
The 2nd part is 12 Ft. long and has the matching plug on one end and battery
clips for jumping the machine off on the other.
Both sections are made of 10 gauge wire, so they're good for the 200 Amps
that these smaller machines can use up to for jumping them off to get started.
These things are supposed to retail for about $30.00
Please go the website, take a look, and if you're interested in handling these,
kick us an email. I'll give you the Price breakdowns at that time.
There is also a video link to them actually being used to jump a motorcycle off
of a truck battery with the engine on the truck not running.
If you know motorcycles or know someone who does, this could be a way for
all concerned to make some money. The next closest thing to these on the market
sells for about $100.00 retail and the jumper cable is only 5 ft. long.
So I think this is something that will sell well if we can get some market penetration.
At any rate, if you're interested, go take a look at www.e-zjump.com
We can be contacted through the contact link on that site.
snowmobiles, etc.
Basically, anything that uses a small battery 12 volt system and that battery is
in a hard to reach or access location.
It is a 2 part Jumper Cable system.
The first part is 18 inches long and has battery terminal ring connectors on one end.
These are permanently attached to the battery. Once installed, you don't have to
dig around to get to your battery any more. The other end of the first part is a
standard two prong plug that is compatible with some of the trickle chargers out there
on the market, and also some of the heated riding suits that are sold.
When not needed, it's just simply tucked out of sight so it is not even noticeable.
The 2nd part is 12 Ft. long and has the matching plug on one end and battery
clips for jumping the machine off on the other.
Both sections are made of 10 gauge wire, so they're good for the 200 Amps
that these smaller machines can use up to for jumping them off to get started.
These things are supposed to retail for about $30.00
Please go the website, take a look, and if you're interested in handling these,
kick us an email. I'll give you the Price breakdowns at that time.
There is also a video link to them actually being used to jump a motorcycle off
of a truck battery with the engine on the truck not running.
If you know motorcycles or know someone who does, this could be a way for
all concerned to make some money. The next closest thing to these on the market
sells for about $100.00 retail and the jumper cable is only 5 ft. long.
So I think this is something that will sell well if we can get some market penetration.
At any rate, if you're interested, go take a look at www.e-zjump.com
We can be contacted through the contact link on that site.